3000W Heating Element Block Fastening Nut Brass 2" L=250mm
Product Available
910 ГРН4500W Heating Element Block Fastening Nut Brass 2" L=300mm
Product Available
949 ГРН6000W Heating Element Block Fastening Nut Brass 2" L=320mm
Product Available
967 ГРН7500W Heating Element Block Fastening Nut Brass 2" L=370mm
Product Available
1 075 ГРН9000W Heating Element Block Fastening Nut Brass 380V 2" L=420mm
Product Available
1 110 ГРН10500W Heating Element Block Fastening Nut Brass 380V 2" L=420mm
Product Available
1 145 ГРН12000W Heating Element Block Fastening Nut Brass 2" L=450mm
Good on order
1 273 ГРН15000W Heating Element Block Fastening Nut Brass 380V 2" L=500mm
Good on order
1 310 ГРНHeating element blocks (TENB) are designed to heat water in tanks under pressure up to 1.5 atm. Blocks are used as components in industrial installations, as well as electrical ones. A block is a group of heating elements mounted in a threaded or flat flange. There is a flange with a thread for fixing the blocks on the object, and a hexagon for a key on the reverse side. The contact rods of the electric heaters are interconnected by jumpers. Any pair of contact rods that are not connected to each other could serve to connect an external circuit. The construction of the blocks is one-piece. The units may only be used in the intended environment. The active part of the cover of the block heaters must be completely in the working environment. The Tenko company produces blocks of heating elements of various capacities (TENB-3, TENB-6, TENB-9, TENB-12, TENB-18) from a tube with a diameter of 10 and 13 mm made of carbon or stainless steel, copper. TENKO company manufactures TENBs for pre-order with various dimensions and fastening nuts according to your sketches.